Fujian Anlin Intelligent Science And Technology Co. Ltd

Among the first companyes in the door and window motor
industry in mainland china listed in the SSE. (stock code:100091)
banner3-

menú de productos

Productos calientes

  • Motor del lado del obturador enrollable

    Motor del lado del obturador del balanceo de la CA

    Ampliamente utilizado en abrir y cerrar el balanceornPuerta del obturador del supermercado, Almacén, cine, hotel, fábrica, etc.

  • Motor de puerta enrollable automático

    Motor de puerta enrollable con interruptor de límite electrónico

    Límite electrónico, valor absoluto, posicionamiento de precisión, prvent para salir rápidamente de la posición límite. 1. fácil instalación: Ajuste del límite del recorrido por el receptor; 2. control inteligente: Anti corriendo límite; 3. Estabilidad: Proteja altamente el motor en tiempo de la tormenta eléctrica; 4. Menos ruido: usando el engranaje y el eje de la alta precisión; 5. Seguridad: puede emparejar con la función de seguridad muchos.

  • Motor del lado del obturador enrollable

    Controlador del motor del obturador del rodillo de la CA 600Kg

    El control de circuito independiente asegura la seguridadEl freno de seguridad, posicionamiento de control limitado exacto, con la protección del interruptor de límite doble, previene la puerta sobre el roll-up.El sistema automático del UPS está disponible, ninguna molestia de la falta de energía

How to installation and debugging the Rolling Door motor?

August 31,2019.

1.Our products are made according to the right installation methods (look out of the inside doors), The users should spin 4 tightened screws if the products will be installed on the left side: relock the 4 screws tightly after making a 180º rotation of the Chain Cage, the wire colors of “white (up)”and “green (down)”must be changed.
2. The Sprocket Bracket can be installed horizontally as shown figure.3.The users can also install this product within 0º-45º. When the sprocket Bracket wasn’t the horizontal installation, the users should spin the automatic cage and give the circle Chain a vertical downward pull. At the same time, the cage must be matched with the end of the motor. After the users make sure that there is no interval between the motor and the cage, please wring the screws tightly, In order to avoid affecting the automatic brake, please don’t wring the cage badly.
Rolling Door Motors should be installed horizontally, the portier and the reel should be concentric and horizontal, the curtain pieces can’t be stuck.
Adjust the Chain a vertical downward pull 3-6mm.
Strictly forbid users to pull the fairlead of motors.
The cross section area of external wire to the motor must be less than 1mm2.
In order to avoid being short-out in the Electric Rolling Door Motor lead to the Electric Rolling Door Motor is burnt, please pay attention to prevent the motors from being soaked and damped.
Please connect to the ground well according to the instruction.
The users should connect to the power PH order correctly. The right installation: The motor can rotate in a counterclockwise direction ( look out of the bottom bracket) when the users push the “up”(white wire) press button. With reference fig.1
Debugging of spacing collar and spacing block:
The users should untie the screw nails.3 of spacing structure, then pull the Chain by manual operation, the distance from the curtain door to the ground is about 1m. Firstly, The users can try the “up”operation, the “down” operation and the “stop” operation.
The users should check that whether the operations are normal or not. If normal, the users can pull the curtain door in the best position that are made sure.
After this operation, the users should rotate the Spacing Collar5, adjust to the Switch 2, after we heard the “tick”voice, the users can lock the  Screw nail 3, try it over and over, relock the screws.
Radom accessories:
1. one bracket          2. one chain wheel           3.one Chain
4.one mandrel           5. one bearing               6. one rotor
7. two bracing boards   8. one press button          9. switch box



Correo electrónico :ymj@zzql.com
Tel :+86-18959610089
Añadir :Guanshan Industrial Park Wu'an Town Changtai County Zhangzhou city, Fujian China (mainland)
servicio en línea

Servicio en línea

86-18959610089

86-18959610089

+86-18959610089

+86-18959610089

86-18959610089

86-18959610089